Turnkey installation
Pellet heating installation
A water-jacket stove or a pellet boiler connected to the radiators of the whole house. Here is what the installation includes and how the system works.
- Site visit
- Installation
- Commissioning

How the installation goes
A fire in the living room, warmth in every room
- 01
The site visit
We start with a visit to see the house, the chimney and any existing system, calculate the power needed and decide whether a water-jacket stove or a boiler suits better.
- 02
The stove
The stove stands in the living room. An auger feeds pellets from the hopper into the burner, ignition is electric, and the water jacket around the firebox takes most of the heat.
- 03
Chimney and flue
We connect the stove to a sealed flue of the right diameter, with an inspection opening and a condensate trap. If the existing chimney does not meet the requirements, we propose a solution.
- 04
The safety group
We install a circulation pump, an expansion vessel and a safety group with a relief valve and an air vent, so the system runs safely in every condition.
- 05
The radiators
Hot water from the jacket circulates through the radiators in every room, and thermostatic valves hold the set temperature in each room separately.
- 06
Buffer and hot water
A buffer tank stores heat and evens out the operation, and a cylinder with a coil lets the stove heat the domestic water too.
- 07
Commissioning
We fill the system, check the pressure and the chimney draught, tune the combustion to your pellets, and show you refilling, cleaning and the controls.
What the installation includes
- A visit to the house, the chimney and the system
- Choosing a stove or boiler of the right power
- Installation and connection to the flue
- Pump, expansion vessel and safety group
- Connecting radiators, buffer tank and cylinder where present
- Filling, testing, tuning the combustion and commissioning
- An explanation of refilling, cleaning and the controls
We settle the exact scope at the site visit.
What we need from you
- A chimney or a place to build a flue
- A power supply for the stove and the pump
- A dry place to store the pellets
The products
Units we install
Before you decide
Questions about the installation
Water-jacket stove or boiler?
A stove warms the living room with a visible fire and sends the rest of its heat to the radiators. A boiler is for larger houses, sits in a utility room and has a bigger hopper for more days without refilling.
How often does it need refilling and cleaning?
It depends on the hopper and the cold: a stove is usually refilled once or twice a day in the coldest days and its burner cleaned every few days. Boilers with a large hopper last longer.
Will it work with my existing chimney?
Often yes, but the chimney must be sealed and of the right diameter. We check it at the site visit, and if it is unsuitable we propose an insulated steel flue.
Request
Request a site visit
Describe your home and we will get in touch to arrange a site visit and a quote.



